Висококачествен Бутиков линеен миксер ART MX 821 - 8 канала → Обява 40382474

+48 Volt phantom power may be independently selected on each
microphone input. A master level control adjusts the signal output
to the low-impedance balanced 1/4-inch TRS jacks.

Prefade output (not affected by the master level control) and
Aux Bus input RCA jacks allow patching of multiple units when more
channels are needed.

The ART MX821S may be used on stage, in the studio, or for
permanent install applications including conference rooms,
corporate boardrooms, churches, restaurants, small clubs, health
clubs and more. A built-in power supply and single high 19-inch
rack mount format allows for easy installation and reliable
long-term operation.

Key Features

• Eight input channels with individual level and pan
  controls
  
• Pan controls place each input mono signal anywhere in the
  output stereo image
  
• Balanced microphone XLR or unbalanced 1/4-inch TS inputs on
  each channel
  
• Full +48V low noise phantom power switchable for each
  microphone input
  
• Balanced left and right 1/4-inch TRS main output jacks with
  master level control
  
• Prefade Output jacks and Aux Bus Input jacks allow units to be
  chained to provide extra inputs
  
• Each line input jack may be individually converted to a direct
  line output by means of internal jumpers
  
• Rugged 1U rack-mount steel chassis with built-in power
  supply
  
• Perfect for stage, studio and permanent installations
  

Specifications

• Input Connections: XLR female balanced (Mic, channels 1-8),
  1/4-inch TS unbalanced (Line, channels 1-8)
  
• RCA unbalanced: (Aux Bus In, Left and Right)
  
• Output Connections: 1/4-inch TRS balanced (Main Outputs, Left
  and Right)
  
• RCA unbalanced: (Prefade Out, Left and Right)
  
• Input Impedance: 2k Ω (Mic), 20k Ω (Line), 51k Ω (Aux Bus
  In)
  
• Output Impedance: 200 Ω (Main Outputs, balanced), 100 Ω
  (Prefade Out)
  
• Frequency Response: 20 Hz - 20 kHz (+0, -1 dB) (CH 1-8 in,
  M
  
• Total Harmonic Distortion: <0.01% @ 1 kHz, typical
  
• Phase Response: All connections are phase coherent
  
• Signal to Noise Ratio: >99dB typical (Ref 0dBu)
  
• CMRR: >43 dB typical
  
• Maximum Input Level: -4 dBu (Mic), +22 dBu (Line)
  
• Maximum Output Level: +24 dBu (balanced), +18 dBu
  (unbalanced)
  
• Maximum Gain: 54 dB (Mic), 29 dB (Line)
  
• Phantom Power: Switch Selectable, +48V DC (regulated and
  filtered), 7 mA current limiting per leg
  
• Power Requirements: USA: 95-125 VAC, 50-60 Hz, <15W
  
• Dimensions: 1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm)
  
• Weight: 6.3 lbs (2.9 kg)
  

A great unit for any rack, offering independent controls of each
channel as well as a master control.