- Dimensions (WHD)
- 420 x 132 x 334 mm / 16.5 x 5.2 x 13.1 inch
- Notes
A 2 x 70 watt stereo integrated amplifier with LDPS (Linear
Drive Power Supply), a low impedance wide bandwidth power supply which
ensures tonal and dynamic fidelity into difficult loudspeaker loads.
Input sockets for Phono (MM/ MC), CD, Tuner, Aux2, and Aux1,
input/output sockets for 2 Tape recorders and terminals for two pairs of
loudspeakers (System 1, System 2). On the front, push buttons for
Power, Speakers (1, 2), Source Direct, Tape 1, Tape 2 and Mono, rotary
controls for Bass, Treble, Volume and Balance, and a rotary Input
Selector switch (Phono MC, Phono MM, CD, Tuner, Aux1, Aux2). Jack for
headphones.SpecificationPower Output per channel .............: 70 watts rms into 8Ω (1kHz 0.06% THD): 105 watts rms into 4Ω (1kHz 0.06% THD)Total Harmonic Distortion at 8Ω .....: 0.008%Intermodulation Distortion ..............: 0.008%Damping Factor 8Ω ........................: 100Input Sensitivity/Impedance :(at 1kHz) MM ..............: 2.5mV/47kΩMC ..............: 250µV/100ΩLine .............: 150mV/33kΩFrequency Response Line..............: 10Hz - 70kHzSignal to Noise ratio MM...............: 86dB(A Weighted) Line .............: 86dBTape Output Level .........................: 300mV (Phono (MM) 5mV 1kHz input)Tape Output Impedance (Phono) ..: 220ΩChannel separation .......................: 65dB (CD input at 10 kHz)Power Consumption ......................: 300 wattsVersion Suffix/Power Requirements2 Voltage version220-240 V AC 50-60Hz Internally switchable4 Voltage version110/120/220/240 V AC 50-60Hz with Voltage SelectorNet weight (2.2 lb = 1 kg)
- 10 kg / 22 lb 0.4 oz (22.026 lb)