Name: Дисплей SW900 за електрически велосипед 36V 48V
Brand: Bazar.bg
SKU: 37443668
Price: 90 BGN
Availability: InStock

Добавена 09 апр, 13:36 ч.

Дисплей SW900 за електрически велосипед 36V 48V

90 лв

Доставка: Купувача

Състояние: Ново

Описание

Дисплей SW900 за електрически велосипед 36V 48V

LCD дисплей даващ подробна информация в реално време за електрическия велосипед. Чрез SW900 можете да следите изминатото разстояние, скоростта с която карате и оставащата електрическа енергия в батерията. Освен информация, устройството позволява контрол и избор на нивото на електрическо подпомагане.

Дисплеят е 2 вида – работещ на 36V или работещ с батерии от 48V до батерии 60V.

Функции:

P01: backlight brightness, level 1 is the darkest, level 3 is the brightest

P02: mileage unit, 0: KM; 1: MILE

P03: Voltage level: 24V, 36V, 48V, default 36V

P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit minutes

P05: Power-assisted gear:

- „0“, 3 gear mode: 1 gear 2V, 2 gear, 3V, 3 gear, 4V;

- „1“, 5 gear mode: 1 gear 2V, 2 gear 2.5V, 3 gear 3V,

4 gear 3.5V, 5 gear 4V;

P06: Wheel diameter: unit, inch; accuracy: 0.1

P07: Number of speed magnets: Range: 1-100

P08: Speed limit: range 0-50km/h, 50 means unlimited speed,

1. Non-communication status (instrument control): When the speed is greater than the set speed, the PWM output is turned off; when the speed drops below the set speed, the PWM output is automatically turned on, and the driving speed is the current speed ±1km/h; Speed limit, speed limit is not limited)

2. Communication status (controller control): The drive speed is maintained at the set value.

Error: ±1km/h; (both assist and speed limit)

Note: The value here is based on kilometers. When the unit setting is converted from kilometer to mile, the speed value of the display interface will be automatically converted to the correct mileage value, but the speed limit value data set at this menu under the mile interface. No conversion, inconsistent with the actual display mile speed limit value;

P09: zero start, non-zero start setting, 0: zero start; 1: non-zero start;

P10: Drive mode setting 0 : Power drive (the booster position determines how much power is output, and the switch is invalid).

1 : Electric drive (driven by the rotary handle, the power assist position is invalid at this time).

2 : The power assist drive and the electric drive coexist at the same time (the electric drive is invalid in the zero start state)

P11: Boost sensitivity setting Range: 1-24

P12: Boost start strength setting Range: 0-5

P13: Power magnetic steel disc type setting 5,8,12 magnetic steel three types

P14: Controller current limit value setting Default 12A Range: 1-20A

P15: The function has not been opened yet.

P16: ODO clear setting Long press the up button for 5 seconds ODO clear

Ако желаете да поръчате, моля да изпратите две имена, телефон и офис на Еконт.

☆ ☆ ☆ ☆ ☆