Name: тестер за ATX захранване 20/24 пинов модел 2
Brand: Bazar.bg
SKU: 43718061
Price: 16 BGN
Availability: InStock

Добавена 06 мар, 09:38 ч.

тестер за ATX захранване 20/24 пинов модел 2

16 лв

Доставка: Купувача

Състояние: Ново

Описание

тестер за ATX захранване 20/24 пинов

модел 2

Тестер на ATX, BTX и ITX захранващи модули (захранващи блокове), с LED индикация

Характеристики:

-
Приложение: Уреда тества наличието на напрежения на всички конектори на
захранващия модул и сигнализира със съответните LED индикатори.

- Съвместими захранващи модули: ATX, BTX, ITX

- Конектори: 20/24-пинов ATX, 4/8-пинов CPU, 6-пинов PCI-E, SATA, HDD/CDROM (Molex), FDD (Floppy)

- Тествани волтажи: 12V Power Good (PG), 5V Standby (+5VSB), +12V, -12V, +5V, -5V, +3.3V

- Дисплей: LED индикатори

Feature:

1. Using high-quality materials, the quality is guaranteed
2. Easy to use, good stability
3. Small and exquisite size
4. The power tester is a stable voltage PC power tester to protect your computer from damage
5. Green indicator = power is OK

Specifications:

Input port: 20/24pin (ATX-connector)
Voltage detection: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by (SB) 12V, power Good (PG)
Ports: Floppy, HDD, CDROM, SATA, 4 pin(P4), 8 pin(Dual-CPU), 6 pin(PCI-Express)

Operation ethod:

1. Supply power to the power supply to be tested.
2.
Insert the 24P (20P) plug of the power supply to be tested into the
corresponding 24P (20P) socket of the power supply tester.
3. Check if the seven lights on the right (+3.3,-12V,PG,+5VSB,+12V,-5V,+5V) are on, it is better if they are all on.
4.
Insert the HDD plug of the power supply to be tested into the HDD
socket of the power supply tester, and check whether the two lights on
the left (+12, +5V) are on.
5. Pull out the HDD plug from the power
tester, and then insert the P4 (P6/P8) plug into the corresponding P4
(P6/P8) socket, and check whether the left light (+12V) is on.
6.
Pull out the P4 (P6/P8) plug from the power tester, and then insert the
FLOPPY (floppy drive) plug into the corresponding FLOPPY socket, and
check whether the two lights on the left (+12V, +5V) are on, and all
lights are good. .
7. Unplug the FLOPPY plug from the power tester,
then insert the SATA plug into the corresponding SATA socket, and check
whether the three lights on the left (+12V, +3.3V, +5V) are on, and all
lights are good.

☆ ☆ ☆ ☆ ☆

Докладвай